Medium to large sized live venues, large scale touring, arena and stadium sound, live music & dance events of 200-500 capacity.
The flagship Stasys Series is the definitive aural arsenal for those with the highest level of audio requirements. Equally at home on the largest tours and in the biggest installations, Stasys always exceeds expectations. With an output-to-size ratio among the highest in the industry, Stasys is characterised by tremendous power output and exceptionally low distortion. The enclosures readily form coherent arrays when used in multiples, retaining their inherently smooth response and musical sonic characteristics.
Stasys Series products make use of many of the latest advancements in acoustic design technology. This has only been possible by utilising our extensive R&D facilities and dedicated design team. For example, all X Series products undergo a technique called 'resonance mapping'. Hundreds of small accelerometers are attached to every surface of an enclosure and measurements are taken that allow a 3D colour map of resonant modes and densities to be displayed. This information is then used to determine material selection, pinpoint any problem areas, refine enclosure bracing, and keep structural mass to a minimum while maintaining the highest achievable output with least possible colouration.
Stasys loudspeaker systems represent some of the most advanced and refined audio products available in the world today.Technical Data Stasys 3 Mk11 (show/hide menu)
The design is the distillation of a lifetimes work. Most of the technology incorporated in the mk2 version has never been attempted before and is a radical departure from the norm. At the heart of the design is the 'waveformer'. Sound waves enter the horn at varying distances from the transducer via the centrally mounted 'waveformer'. The distance depends on the frequency and also the radiation pattern of the transducer. New types of transducers were developed that emit different frequencies from different locations around their radiation surface. All these locations are then channelled to the 'waveformer' and emitted at a precise distance down the horn.
The benefits of wave forming are enormous. All frequencies reach the mouth at exactly the same time so phase cancellation is virtually eliminated. This provides an extremely flat and uniform response with a very wide bandwidth available from each band. Dispersion characteristics are radically improved due to the 'waveformers' refraction grid, which reduces HF beaming by a significant amount. The mk2 version also incorporates a 2 way passive - 3 way active selector, further enhancing setup flexibility.
|Frequency response||120 Hz - 20KHz -3dB|
|Efficiency||LF : 108 dB 1w/1m|
MF : 108 dB 1w/1m
HF : 109 dB 1w/1m
|Crossover Point||800 Hz - 3.2 KHz|
|Impedance||LF/MF/HF 8 ohms|
|Power Handling||LF 500 w|
MF 200 w
HF 80 w
|Maximum Output||135 db cont|
140 db peak
|Driver configuration||1 x 12" : 1 x 6.5" : 1 x 1"|
|Dispersion||45 h x 35 v|
|Protection||HF - Electronic device|
MF - Electronic device
|Connector||2 x 8 pole 1 x 4 pole speakon|
|Enclosure||18 mm 15 laminate plywood|
|Rigging||4 x Aero track proprietary flying system|
|Grill||Perforated steel - foam filter|
The Stasys X sets the standard for low frequency wide bandwidth loudspeakers. Its design perfectly integrates many new technologies to form a complete one box solution for all low frequency applications.
Horn loading gives the Stasys X its lighting quick transient response and high efficiency, while recently developed resonant chamber technology adds extension down to 35Hz. Stasys X uses a total of five resonant chambers, two connect to its dual horn paths whilst the other three transmit via a series of tuned ducts. Both the resonant chambers and the horns outputs are combined in phase at the wave integrator, which also makes use of horn loading to maximise both long distance projection and efficiency.
Stasys X also features HTT (heat transference technology). Two rear located heatsinks are used to transfer heat from the voice coil and magnet assembly to drastically improve both power compression effects and long term reliability.
|Frequency response||33 Hz - 200 Hz -3dB points|
|Efficiency||LF : 105 dB 1w/1m|
|Crossover Point||Hi Pass : 30Hz - 24 dB/oct Lo Pass : 110 - 138 Hz - 24 - 48 dB/oct|
|Power Handling||2800 w|
|Maximum Output||138 db cont|
|Driver configuration 2 x 18" - 125 mm voice coil - neo|
|Connector||2 x 4 pole speakon|
Medium to large sized live venues, large scale touring, arena and stadium sound, live music & dance events of 200+ capacity.
Logic Systems produce high quality british designed & built professional speaker systems. The 1296 is probably their most popular system that can be used together in multiples of up to of 3 pairs or 3 stacks per side for 180 degree dispersion with a massive total power output of 18Kw. Ideal for live music and club events.
The Void Basys is ideal for smaller events where sound re-enforcement is required for speeches and background music. Each Basys system comprises of a pair of B12 mid hi cabinets, a pair of B15 bass cabinets and either a B3 or B4 3 channel amplifier. The system also comes complete with a versatile selection of hardware including, monting poles, wheels, cables, padded road covers and a flight case for the amplifier.
The B12 also features multi-angled sides allowing it to be used as a fold-back monitor whilst its 12 M8 flying points allow for quick and easy rigging in fixed installations.Technical Data - Void Basys (show/hide menu)
|Frequency response||B12 65 Hz - 18 KHz -3dB B15 40 Hz - 200 Hz -3dB|
|Efficiency||B12 : 99.5 dB 1w/1m|
B15 : 98.0 dB 1w/1m
|Crossover Point||B15 140 Hz & B12 2.2KHz|
|Impedance||B12 & B15 8 ohms|
|Power Handling||B12 300 w|
B15 600 w
|Maximum Output||B12 124 dB cont|
B15 125 dB cont
|Driver configuration||B12 1 x 12" 1 x 1" B15 1 x 15"|
|Connector||2 x 4 pole speakon|
|Amplifier Output||2 x 400 w rms into 4 ohms 1 x 650 w rms into 4 ohms|
|Weight (mm)||B12 580 B15 580|
|Width (mm)||B12 370 B15 496|
|Depth (mm)||B12 362 B15 550|
|Weight (kg)||B12 20.0 B15 34 B3 22|
Includes 1 wedge monitor speaker and amplification cabling and graphic equaliser for 1 fold back monitor mix. Drum fills, side fills and in-fills and DJ monitor systems on tripod stands are also available.